DIY Bubble Jewelry Display


Here’s a super fun project. What’s even better is that by the time you’re done, you’ll have a truly unique jewelry display set for your dresser!

Watch, like, comment and share…

You will need:

  • Colorless plastic Christmas tree ball ornaments in different sizes

  • Jars with diameters close to the diameters of the ornaments

  • Glue gun

  • Strong scissors

  • Pebbles in different colors of your choice

  • Thick bendable aluminum wire

  • Pliers

  • Compass or a pointed edge to mark ornaments


  1. Place each Christmas ornament, hanging tip facing down, onto of a suitably sized jar which will cover about 1 inch of the ornament

  2. Score a line around the circumference of the ornament using the edge of the jar as a guide

  3. Use the scissors to cut out the top part of the ornament

  4. Cut about 4 inches of aluminum wire

  5. Bend the wire and form it into a 1 inch diameter ring

  6. Apply hot glue with the glue gun to the ring

  7. Hold the ring firmly to the bottom of the Christmas ornament. Angle the ornament so that the opening you just cut is to the front and the ring is at the bottom

  8. After the hot glue cools, fill up the lower part of the ornament with your desired color of pebbles

  9. Repeat the process for different bubble display sizes

  10. Arrange the displays on your dresser or night stand or wherever you like

  11. Display your jewelry and enjoy!


Top Tip: Use this beautiful display every night to plan your jewelry according to your outfits